Schomburg

Description:

The AQUAFIN-2K/M / UNIFIX-S3 system is one of an approved system of constructive durable solutions for the waterproofing and tiling of balconies and terraces. Through use of these products which are attuned to each other, the life span of a tiled installation can be noticably increased.

ASO-EZ4
Special hydrophobic cement

Description:

• Fibre-reinforced, special hydrophobic cement for the production of water-repellent screeds and mortars.
• Binder for water permeable single grain or drainage mortars.
• Screeds and mortars produced with ASO-EZ4 provide additional protection against moisture and frost damage by eliminating capillary water ingress.
• For interior and exterior use.
• Foot traffic after 6 hours. For "wet in wet" applications or as a screed which can be tiled after approx. three days. Heated screeds can also be commissioned after approx. 3 days in accordance with recognised technical regulations.
• The readiness to tile after approx. 3 days can be achieved with a mix ratio of 1:4 parts by weight, the use of dry aggregate to DIN 4226 of a grading between A8 - B8 closer to B8 with consistent particle size, a water addition of 17 litres per 50 kg ASO-EZ4, an ambient and substrate temperature of +23ºC, a relative humidity of 50% and a thickness of 5 cm.
• For screeds of qualtity class: CT-C50-F6-A9.

Consumption:

See technical data sheet.

Zum Verbrauchsrechner

AQUAFIN-2K/M
Elastomeric waterproofing slurry

Description:

• 2 component, flexible, cementitious mineral-based waterproofing slurry (MDS) against ground, seepage (fluctuating) and backwater.
• For new and existing buildings in the building and civil engineering sector, for interior and exterior use as well as beneath tiles. Also for use in channels, manholes and swimming pools.
• Structural waterproofing in accordance with DIN 18195, part 2, tables 7 and 8.
• Approved in accordance with DVGW worksheets W270 and W347.
• Tested according to German building regulations as a bonded waterproof system (AIV) for use beneath tiles in wet duty classifications A and B (DIN 18195, part 7) and for wet duty classifications A0 and B0 in accordance with the ZDB technical sheet "Bonded waterproof membranes" as well as for structural waterproofing.
• Tested for water impermeability to DIN 4030 against water aggressive to concrete up to XA2 level of attack.
• Tested for resistance to liquid manure.
• Low emissions.

Consumption:

Approx. 3.5 - 4.5 kg/m² (dependent on service demands / situation).

Zum Verbrauchsrechner

UNIFIX-S3
Flexible adhesive

Description:

• Tested to DIN EN 12004, C1 TE S2.
• For interior & exterior use.
• With especially high deformability.
• UNIFIX-S3 is used as a thin-bed adhesive for vitrified and earthenware tiles, ceramic tiles with low water absorption ≤0.5% (fully vitrified), clinker, mosaics and non-translucent natural stone not prone to discolouration.
• For difficult substrates and heavy duty areas.
• Permits the fixing of tiles to 8 day old screeds.
• Suitable for the installation of fully vitrified tiles in exterior areas.
• Especially suitable for swimming pools, balconies and terraces.
• Water impermeable.
• Deforms up to 30mm.

Consumption:

approx. 2.80 kg/m² with a 6 mm notched trowel
approx. 3.70 kg/m² with an 8 mm notched trowel
approx. 4.70 kg/m² with a 10 mm notched trowel

Zum Verbrauchsrechner

ASO-Dichtband-2000
Waterproof tape for standard applications

Description:

• High quality composite material, elastic, tear-proof, waterproof, water vapour permeable. Ensures quick drying of water-containing tile adhesives and waterproof membranes, highly resistant to aggressive substances.
• For forming waterproof expansion and connection joints within waterproof coatings produced with SANIFLEX, SANIFIN, AQUAFIN-1K-FLEX, AQUAFIN-2K, AQUAFIN-2K/M, AQUAFIN-RS300 and ASOFLEX-AKB.
• Technically approved as a system with the waterproofing materials.

ASO-Dichtband-2000-S
Special waterproof tape for more demanding situations and heavy duty use

Description:

• High quality composite, elastic, extremely tear-proof, waterproof, vapour permeable. Ensures the quick drying of water containing tile adhesives and waterproof coatings, high resistance to aggresive materials.
• For the watertight construction of expansion and construction joints within waterproof coatings produced with e.g. SANIFLEX, SANIFIN, AQUAFIN-1K-FLEX, AQUAFIN-2K, AQUAFIN-2K/M, AQUAFIN-RS300 and ASOFLEX-AKB e.g. in swimming pools, subterranean car parks and areas in contact with the ground.
• Technically approved as a system with waterproofing materials.


• Width: Dependent on the customer's needs, special sizes from 5 cm to 1 m wide can be produced in the factory.

ASO-Joint-Sleeve-Floor
For the waterproofing of floor drains

Description:

• Composite material for waterproofing floor drains beneath ceramic tiles with e.g. loose/fixed flange constructions in swimming pools, showers in wet areas without shower trays using the waterproof systems SANIFIN, AQUAFIN-RS300, AQUAFIN-1K-FLEX, AQUAFIN-2K, AQUAFIN-2K/M, ASOFLEX-AKB.
• Size: 45 cm x 45 cm.
• System component of the waterproofing systems named above.

HF05 Brillantfuge
High strength, flexible, cementitious tile grout

Description:

• High abrasion resistance, reduced water absorption, polymer modified, frost resistant and water repellent. Easy to use, foot traffic after 6 hours.
• For grouting fully vitrified, vitrified and synthetic stone tiles etc. in swimming pools, bathrooms, showers and living areas. For use on balconies and also on heated screeds and flow screeds.
• Free from the hazardous to health silicosis inducing fine quartz dust.
• Fulfills the requirements for CG2 WA in accordance with DIN EN 13888.
• For joints from 3 - 20 mm wide.
• Approved as a system with AQUAFIN-2K/M and SOLOFLEX, conforming to the DVGW work sheet W270.

Consumption:

Dependent on the tile format as well as the joint width and depth (see table on the technical data sheet).

Zum Verbrauchsrechner

ESCOSIL-2000
Silicone sealant

Description:

• High-quality, elastic, single component joint sealant, based on silicone-rubber, acetic cross-linking and contains a fungicide.


• For expansion joints and heavy duty connecting joints for use in sanitary applications, in civil and below ground engineering, roofing, metal structures and window construction.
• After application the material reacts with humidity forming an elastic, watertight sealant resistant to weathering and ageing with good chemical resistance.

Consumption:

Dependent on joint volume.